t

# GenMapLike 

#### trait GenMapLike[K, +V, +Repr] extends GenIterableLike[(K, V), Repr] with Equals with Parallelizable[(K, V), ParMap[K, V]]

A trait for all maps upon which operations may be implemented in parallel.

Source
GenMapLike.scala
Linear Supertypes
Equals, GenIterableLike[(K, V), Repr], GenTraversableLike[(K, V), Repr], Parallelizable[(K, V), ParMap[K, V]], GenTraversableOnce[(K, V)], AnyRef, Any
Ordering
1. Alphabetic
2. By Inheritance
Inherited
1. GenMapLike
2. Equals
3. GenIterableLike
4. GenTraversableLike
5. Parallelizable
6. GenTraversableOnce
7. AnyRef
8. Any
Implicitly
1. by CollectionsHaveToParArray
3. by StringFormat
4. by Ensuring
5. by ArrowAssoc
1. Hide All
2. Show All
Visibility
1. Public
2. All

### Abstract Value Members

1. abstract def +[V1 >: V](kv: (K, V1)): GenMap[K, V1]
2. abstract def -(key: K): Repr
3. abstract def /:[B](z: B)(op: (B, (K, V)) ⇒ B): B

Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Note: `/:` is alternate syntax for `foldLeft`; `z /: xs` is the same as `xs foldLeft z`.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

```scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (5 /: a)(_+_)
b: Int = 15

scala> val c = (5 /: a)((x,y) => x + y)
c: Int = 15```

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this collection or iterator, going left to right with the start value `z` on the left:

`op(...op(op(z, x_1), x_2), ..., x_n)`

where `x1, ..., xn` are the elements of this collection or iterator.

Definition Classes
GenTraversableOnce
4. abstract def :\[B](z: B)(op: ((K, V), B) ⇒ B): B

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Note: `:\` is alternate syntax for `foldRight`; `xs :\ z` is the same as `xs foldRight z`.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Examples:

Note that the folding function used to compute b is equivalent to that used to compute c.

```scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = (a :\ 5)(_+_)
b: Int = 15

scala> val c = (a :\ 5)((x,y) => x + y)
c: Int = 15```
B

the result type of the binary operator.

z

the start value

op

the binary operator

returns

the result of inserting `op` between consecutive elements of this collection or iterator, going right to left with the start value `z` on the right:

`op(x_1, op(x_2, ... op(x_n, z)...))`

where `x1, ..., xn` are the elements of this collection or iterator.

Definition Classes
GenTraversableOnce
5. abstract def aggregate[B](z: ⇒ B)(seqop: (B, (K, V)) ⇒ B, combop: (B, B) ⇒ B): B

Aggregates the results of applying an operator to subsequent elements.

Aggregates the results of applying an operator to subsequent elements.

This is a more general form of `fold` and `reduce`. It is similar to `foldLeft` in that it doesn't require the result to be a supertype of the element type. In addition, it allows parallel collections to be processed in chunks, and then combines the intermediate results.

`aggregate` splits the collection or iterator into partitions and processes each partition by sequentially applying `seqop`, starting with `z` (like `foldLeft`). Those intermediate results are then combined by using `combop` (like `fold`). The implementation of this operation may operate on an arbitrary number of collection partitions (even 1), so `combop` may be invoked an arbitrary number of times (even 0).

As an example, consider summing up the integer values of a list of chars. The initial value for the sum is 0. First, `seqop` transforms each input character to an Int and adds it to the sum (of the partition). Then, `combop` just needs to sum up the intermediate results of the partitions:

`List('a', 'b', 'c').aggregate(0)({ (sum, ch) => sum + ch.toInt }, { (p1, p2) => p1 + p2 })`
B

the type of accumulated results

z

the initial value for the accumulated result of the partition - this will typically be the neutral element for the `seqop` operator (e.g. `Nil` for list concatenation or `0` for summation) and may be evaluated more than once

seqop

an operator used to accumulate results within a partition

combop

an associative operator used to combine results from different partitions

Definition Classes
GenTraversableOnce
6. abstract def apply(key: K): V
7. abstract def canEqual(that: Any)

A method that should be called from every well-designed equals method that is open to be overridden in a subclass.

A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.

that

the value being probed for possible equality

returns

true if this instance can possibly equal `that`, otherwise false

Definition Classes
Equals
8. abstract def contains(key: K)

Tests whether this map contains a binding for a key.

Tests whether this map contains a binding for a key.

key

the key

returns

`true` if there is a binding for `key` in this map, `false` otherwise.

9. abstract def count(p: ((K, V)) ⇒ Boolean): Int

Counts the number of elements in the collection or iterator which satisfy a predicate.

Counts the number of elements in the collection or iterator which satisfy a predicate.

p

the predicate used to test elements.

returns

the number of elements satisfying the predicate `p`.

Definition Classes
GenTraversableOnce
10. abstract def default(key: K): V
11. abstract def drop(n: Int): Repr

Selects all elements except first n ones.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the number of elements to drop from this general collection.

returns

a general collection consisting of all elements of this general collection except the first `n` ones, or else the empty general collection, if this general collection has less than `n` elements.

Definition Classes
GenTraversableLike
12. abstract def dropWhile(pred: ((K, V)) ⇒ Boolean): Repr

Drops longest prefix of elements that satisfy a predicate.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

The predicate used to test elements.

returns

the longest suffix of this general collection whose first element does not satisfy the predicate `p`.

Definition Classes
GenTraversableLike
13. abstract def exists(p: ((K, V)) ⇒ Boolean)

Tests whether a predicate holds for at least one element of this collection or iterator.

Tests whether a predicate holds for at least one element of this collection or iterator.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

`true` if the given predicate `p` is satisfied by at least one element of this collection or iterator, otherwise `false`

Definition Classes
GenTraversableOnce
14. abstract def filter(pred: ((K, V)) ⇒ Boolean): Repr

Selects all elements of this general collection which satisfy a predicate.

Selects all elements of this general collection which satisfy a predicate.

pred

the predicate used to test elements.

returns

a new general collection consisting of all elements of this general collection that satisfy the given predicate `p`. Their order may not be preserved.

Definition Classes
GenTraversableLike
15. abstract def filterKeys(p: (K) ⇒ Boolean): GenMap[K, V]

Filters this map by retaining only keys satisfying a predicate.

Filters this map by retaining only keys satisfying a predicate.

p

the predicate used to test keys

returns

an immutable map consisting only of those key value pairs of this map where the key satisfies the predicate `p`. The resulting map wraps the original map without copying any elements.

16. abstract def filterNot(pred: ((K, V)) ⇒ Boolean): Repr

Selects all elements of this general collection which do not satisfy a predicate.

Selects all elements of this general collection which do not satisfy a predicate.

pred

the predicate used to test elements.

returns

a new general collection consisting of all elements of this general collection that do not satisfy the given predicate `p`. Their order may not be preserved.

Definition Classes
GenTraversableLike
17. abstract def find(p: ((K, V)) ⇒ Boolean): Option[(K, V)]

Finds the first element of the collection or iterator satisfying a predicate, if any.

Finds the first element of the collection or iterator satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

p

the predicate used to test elements.

returns

an option value containing the first element in the collection or iterator that satisfies `p`, or `None` if none exists.

Definition Classes
GenTraversableOnce
18. abstract def fold[A1 >: (K, V)](z: A1)(op: (A1, A1) ⇒ A1): A1

Folds the elements of this collection or iterator using the specified associative binary operator.

Folds the elements of this collection or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite-sized collections.

A1

a type parameter for the binary operator, a supertype of `A`.

z

a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., `Nil` for list concatenation, 0 for addition, or 1 for multiplication).

op

a binary operator that must be associative.

returns

the result of applying the fold operator `op` between all the elements and `z`, or `z` if this collection or iterator is empty.

Definition Classes
GenTraversableOnce
19. abstract def foldLeft[B](z: B)(op: (B, (K, V)) ⇒ B): B

Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this collection or iterator, going left to right with the start value `z` on the left:

`op(...op(z, x_1), x_2, ..., x_n)`

where `x1, ..., xn` are the elements of this collection or iterator. Returns `z` if this collection or iterator is empty.

Definition Classes
GenTraversableOnce
20. abstract def foldRight[B](z: B)(op: ((K, V), B) ⇒ B): B

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this collection or iterator, going right to left with the start value `z` on the right:

`op(x_1, op(x_2, ... op(x_n, z)...))`

where `x1, ..., xn` are the elements of this collection or iterator. Returns `z` if this collection or iterator is empty.

Definition Classes
GenTraversableOnce
21. abstract def forall(p: ((K, V)) ⇒ Boolean)

Tests whether a predicate holds for all elements of this collection or iterator.

Tests whether a predicate holds for all elements of this collection or iterator.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

`true` if this collection or iterator is empty or the given predicate `p` holds for all elements of this collection or iterator, otherwise `false`.

Definition Classes
GenTraversableOnce
22. abstract def get(key: K): Option[V]
23. abstract def groupBy[K](f: ((K, V)) ⇒ K): GenMap[K, Repr]

Partitions this general collection into a map of general collections according to some discriminator function.

Partitions this general collection into a map of general collections according to some discriminator function.

Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general collection.

K

the type of keys returned by the discriminator function.

f

the discriminator function.

returns

A map from keys to general collections such that the following invariant holds:

`(xs groupBy f)(k) = xs filter (x => f(x) == k)`

That is, every key `k` is bound to a general collection of those elements `x` for which `f(x)` equals `k`.

Definition Classes
GenTraversableLike
24. abstract def hasDefiniteSize

Tests whether this collection or iterator is known to have a finite size.

Tests whether this collection or iterator is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as `Stream`, the predicate returns `true` if all elements have been computed. It returns `false` if the stream is not yet evaluated to the end. Non-empty Iterators usually return `false` even if they were created from a collection with a known finite size.

Note: many collection methods will not work on collections of infinite sizes. The typical failure mode is an infinite loop. These methods always attempt a traversal without checking first that `hasDefiniteSize` returns `true`. However, checking `hasDefiniteSize` can provide an assurance that size is well-defined and non-termination is not a concern.

returns

`true` if this collection is known to have finite size, `false` otherwise.

Definition Classes
GenTraversableOnce
25. abstract def head: (K, V)

Selects the first element of this general collection.

Selects the first element of this general collection.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the first element of this general collection.

Definition Classes
GenTraversableLike
Exceptions thrown

`NoSuchElementException` if the general collection is empty.

26. abstract def headOption: Option[(K, V)]

Optionally selects the first element.

Optionally selects the first element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the first element of this general collection if it is nonempty, `None` if it is empty.

Definition Classes
GenTraversableLike
27. abstract def init: Repr

Selects all elements except the last.

Selects all elements except the last.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

a general collection consisting of all elements of this general collection except the last one.

Definition Classes
GenTraversableLike
Exceptions thrown

`UnsupportedOperationException` if the general collection is empty.

28. abstract def isDefinedAt(key: K)

Tests whether this map contains a binding for a key.

Tests whether this map contains a binding for a key. This method, which implements an abstract method of trait `PartialFunction`, is equivalent to `contains`.

key

the key

returns

`true` if there is a binding for `key` in this map, `false` otherwise.

29. abstract def isEmpty

Tests whether the collection or iterator is empty.

Tests whether the collection or iterator is empty.

Note: Implementations in subclasses that are not repeatedly traversable must take care not to consume any elements when `isEmpty` is called.

returns

`true` if the collection or iterator contains no elements, `false` otherwise.

Definition Classes
GenTraversableOnce
30. abstract def isTraversableAgain

Tests whether this general collection can be repeatedly traversed.

Tests whether this general collection can be repeatedly traversed.

returns

`true`

Definition Classes
GenTraversableLikeGenTraversableOnce
31. abstract def iterator: Iterator[(K, V)]
Definition Classes
GenIterableLike
32. abstract def keySet: GenSet[K]
33. abstract def keys: GenIterable[K]

Collects all keys of this map in an iterable collection.

Collects all keys of this map in an iterable collection.

returns

the keys of this map as an iterable.

34. abstract def keysIterator: Iterator[K]

Creates an iterator for all keys.

Creates an iterator for all keys.

returns

an iterator over all keys.

35. abstract def last: (K, V)

Selects the last element.

Selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

The last element of this general collection.

Definition Classes
GenTraversableLike
Exceptions thrown

`NoSuchElementException` If the general collection is empty.

36. abstract def lastOption: Option[(K, V)]

Optionally selects the last element.

Optionally selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

the last element of this general collection\$ if it is nonempty, `None` if it is empty.

Definition Classes
GenTraversableLike
37. abstract def mapValues[W](f: (V) ⇒ W): GenMap[K, W]

Transforms this map by applying a function to every retrieved value.

Transforms this map by applying a function to every retrieved value.

f

the function used to transform values of this map.

returns

a map view which maps every key of this map to `f(this(key))`. The resulting map wraps the original map without copying any elements.

38. abstract def mkString

Displays all elements of this collection or iterator in a string.

Displays all elements of this collection or iterator in a string.

returns

a string representation of this collection or iterator. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this collection or iterator follow each other without any separator string.

Definition Classes
GenTraversableOnce
39. abstract def mkString(sep: String)

Displays all elements of this collection or iterator in a string using a separator string.

Displays all elements of this collection or iterator in a string using a separator string.

sep

the separator string.

returns

a string representation of this collection or iterator. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this collection or iterator are separated by the string `sep`.

Definition Classes
GenTraversableOnce
Example:
1. `List(1, 2, 3).mkString("|") = "1|2|3"`

40. abstract def mkString(start: String, sep: String, end: String)

Displays all elements of this collection or iterator in a string using start, end, and separator strings.

Displays all elements of this collection or iterator in a string using start, end, and separator strings.

start

the starting string.

sep

the separator string.

end

the ending string.

returns

a string representation of this collection or iterator. The resulting string begins with the string `start` and ends with the string `end`. Inside, the string representations (w.r.t. the method `toString`) of all elements of this collection or iterator are separated by the string `sep`.

Definition Classes
GenTraversableOnce
Example:
1. `List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"`

41. abstract def nonEmpty

Tests whether the collection or iterator is not empty.

Tests whether the collection or iterator is not empty.

returns

`true` if the collection or iterator contains at least one element, `false` otherwise.

Definition Classes
GenTraversableOnce
42. abstract def parCombiner: Combiner[(K, V), ParMap[K, V]]

The default `par` implementation uses the combiner provided by this method to create a new parallel collection.

The default `par` implementation uses the combiner provided by this method to create a new parallel collection.

returns

a combiner for the parallel collection of type `ParRepr`

Attributes
protected[this]
Definition Classes
Parallelizable
43. abstract def partition(pred: ((K, V)) ⇒ Boolean): (Repr, Repr)

Partitions this general collection in two general collections according to a predicate.

Partitions this general collection in two general collections according to a predicate.

pred

the predicate on which to partition.

returns

a pair of general collections: the first general collection consists of all elements that satisfy the predicate `p` and the second general collection consists of all elements that don't. The relative order of the elements in the resulting general collections may not be preserved.

Definition Classes
GenTraversableLike
44. abstract def reduce[A1 >: (K, V)](op: (A1, A1) ⇒ A1): A1

Reduces the elements of this collection or iterator using the specified associative binary operator.

Reduces the elements of this collection or iterator using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

A1

A type parameter for the binary operator, a supertype of `A`.

op

A binary operator that must be associative.

returns

The result of applying reduce operator `op` between all the elements if the collection or iterator is nonempty.

Definition Classes
GenTraversableOnce
Exceptions thrown

`UnsupportedOperationException` if this collection or iterator is empty.

45. abstract def reduceLeftOption[B >: (K, V)](op: (B, (K, V)) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this collection or iterator, going left to right.

Optionally applies a binary operator to all elements of this collection or iterator, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceLeft(op)` if this collection or iterator is nonempty, `None` otherwise.

Definition Classes
GenTraversableOnce
46. abstract def reduceOption[A1 >: (K, V)](op: (A1, A1) ⇒ A1): Option[A1]

Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.

Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

A1

A type parameter for the binary operator, a supertype of `A`.

op

A binary operator that must be associative.

returns

An option value containing result of applying reduce operator `op` between all the elements if the collection is nonempty, and `None` otherwise.

Definition Classes
GenTraversableOnce
47. abstract def reduceRight[B >: (K, V)](op: ((K, V), B) ⇒ B): B

Applies a binary operator to all elements of this collection or iterator, going right to left.

Applies a binary operator to all elements of this collection or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this collection or iterator, going right to left:

`op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))`

where `x1, ..., xn` are the elements of this collection or iterator.

Definition Classes
GenTraversableOnce
Exceptions thrown

`UnsupportedOperationException` if this collection or iterator is empty.

48. abstract def reduceRightOption[B >: (K, V)](op: ((K, V), B) ⇒ B): Option[B]

Optionally applies a binary operator to all elements of this collection or iterator, going right to left.

Optionally applies a binary operator to all elements of this collection or iterator, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceRight(op)` if this collection or iterator is nonempty, `None` otherwise.

Definition Classes
GenTraversableOnce
49. abstract def repr: Repr
Definition Classes
GenTraversableLike
50. abstract def scan[B >: (K, V), That](z: B)(op: (B, B) ⇒ B)(implicit cbf: CanBuildFrom[Repr, B, That]): That

Computes a prefix scan of the elements of the collection.

Computes a prefix scan of the elements of the collection.

Note: The neutral element `z` may be applied more than once.

B

element type of the resulting collection

That

type of the resulting collection

z

neutral element for the operator `op`

op

the associative operator for the scan

cbf

combiner factory which provides a combiner

returns

a new general collection containing the prefix scan of the elements in this general collection

Definition Classes
GenTraversableLike
51. abstract def scanLeft[B, That](z: B)(op: (B, (K, V)) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

Produces a collection containing cumulative results of applying the operator going left to right.

Produces a collection containing cumulative results of applying the operator going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and and the new element type `B`.

returns

collection with intermediate results

Definition Classes
GenTraversableLike
52. abstract def scanRight[B, That](z: B)(op: ((K, V), B) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

Produces a collection containing cumulative results of applying the operator going right to left.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Example:

`List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)`
B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and and the new element type `B`.

returns

collection with intermediate results

Definition Classes
GenTraversableLike
Annotations
@migration
Migration

(Changed in version 2.9.0) The behavior of `scanRight` has changed. The previous behavior can be reproduced with scanRight.reverse.

53. abstract def seq: Map[K, V]
Definition Classes
GenMapLikeParallelizableGenTraversableOnce
54. abstract def size: Int

The size of this general collection.

The size of this general collection.

Note: will not terminate for infinite-sized collections.

returns

the number of elements in this general collection.

Definition Classes
GenTraversableLikeGenTraversableOnce
55. abstract def slice(unc_from: Int, unc_until: Int): Repr

Selects an interval of elements.

Selects an interval of elements. The returned collection is made up of all elements `x` which satisfy the invariant:

`from <= indexOf(x) < until`

Note: might return different results for different runs, unless the underlying collection type is ordered.

unc_from

the lowest index to include from this general collection.

unc_until

the lowest index to EXCLUDE from this general collection.

returns

a general collection containing the elements greater than or equal to index `from` extending up to (but not including) index `until` of this general collection.

Definition Classes
GenTraversableLike
56. abstract def span(pred: ((K, V)) ⇒ Boolean): (Repr, Repr)

Splits this general collection into a prefix/suffix pair according to a predicate.

Splits this general collection into a prefix/suffix pair according to a predicate.

Note: `c span p` is equivalent to (but possibly more efficient than) `(c takeWhile p, c dropWhile p)`, provided the evaluation of the predicate `p` does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

the test predicate

returns

a pair consisting of the longest prefix of this general collection whose elements all satisfy `p`, and the rest of this general collection.

Definition Classes
GenTraversableLike
57. abstract def splitAt(n: Int): (Repr, Repr)

Splits this general collection into two at a given position.

Splits this general collection into two at a given position. Note: `c splitAt n` is equivalent to (but possibly more efficient than) `(c take n, c drop n)`.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the position at which to split.

returns

a pair of general collections consisting of the first `n` elements of this general collection, and the other elements.

Definition Classes
GenTraversableLike
58. abstract def stringPrefix

Defines the prefix of this object's `toString` representation.

Defines the prefix of this object's `toString` representation.

returns

a string representation which starts the result of `toString` applied to this general collection. By default the string prefix is the simple name of the collection class general collection.

Definition Classes
GenTraversableLike
59. abstract def tail: Repr

Selects all elements except the first.

Selects all elements except the first.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

a general collection consisting of all elements of this general collection except the first one.

Definition Classes
GenTraversableLike
Exceptions thrown

`UnsupportedOperationException` if the general collection is empty.

60. abstract def take(n: Int): Repr

Selects first n elements.

Selects first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

n

the number of elements to take from this general collection.

returns

a general collection consisting only of the first `n` elements of this general collection, or else the whole general collection, if it has less than `n` elements.

Definition Classes
GenTraversableLike
61. abstract def takeWhile(pred: ((K, V)) ⇒ Boolean): Repr

Takes longest prefix of elements that satisfy a predicate.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

pred

The predicate used to test elements.

returns

the longest prefix of this general collection whose elements all satisfy the predicate `p`.

Definition Classes
GenTraversableLike
62. abstract def toBuffer[A1 >: (K, V)]: Buffer[A1]

Uses the contents of this collection or iterator to create a new mutable buffer.

Uses the contents of this collection or iterator to create a new mutable buffer.

Note: will not terminate for infinite-sized collections.

returns

a buffer containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
63. abstract def toIndexedSeq: immutable.IndexedSeq[(K, V)]

Converts this collection or iterator to an indexed sequence.

Converts this collection or iterator to an indexed sequence.

Note: will not terminate for infinite-sized collections.

returns

an indexed sequence containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
64. abstract def toIterable: GenIterable[(K, V)]

Converts this collection or iterator to an iterable collection.

Converts this collection or iterator to an iterable collection. Note that the choice of target `Iterable` is lazy in this default implementation as this `TraversableOnce` may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

Note: will not terminate for infinite-sized collections.

returns

an `Iterable` containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
65. abstract def toIterator: Iterator[(K, V)]

Returns an Iterator over the elements in this collection or iterator.

Returns an Iterator over the elements in this collection or iterator. Will return the same Iterator if this instance is already an Iterator.

Note: will not terminate for infinite-sized collections.

returns

an Iterator containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
66. abstract def toList: List[(K, V)]

Converts this collection or iterator to a list.

Converts this collection or iterator to a list.

Note: will not terminate for infinite-sized collections.

returns

a list containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
67. abstract def toSeq: GenSeq[(K, V)]

Converts this collection or iterator to a sequence.

Converts this collection or iterator to a sequence. As with `toIterable`, it's lazy in this default implementation, as this `TraversableOnce` may be lazy and unevaluated.

Note: will not terminate for infinite-sized collections.

returns

a sequence containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
68. abstract def toSet[A1 >: (K, V)]: GenSet[A1]

Converts this collection or iterator to a set.

Converts this collection or iterator to a set.

Note: will not terminate for infinite-sized collections.

returns

a set containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
69. abstract def toStream: Stream[(K, V)]

Converts this collection or iterator to a stream.

Converts this collection or iterator to a stream.

returns

a stream containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
70. abstract def toTraversable: GenTraversable[(K, V)]

Converts this collection or iterator to an unspecified Traversable.

Converts this collection or iterator to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite-sized collections.

returns

a Traversable containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
71. abstract def toVector: Vector[(K, V)]

Converts this collection or iterator to a Vector.

Converts this collection or iterator to a Vector.

Note: will not terminate for infinite-sized collections.

returns

a vector containing all elements of this collection or iterator.

Definition Classes
GenTraversableOnce
72. abstract def values: GenIterable[V]

Collects all values of this map in an iterable collection.

Collects all values of this map in an iterable collection.

returns

the values of this map as an iterable.

73. abstract def valuesIterator: Iterator[V]

Creates an iterator for all values in this map.

Creates an iterator for all values in this map.

returns

an iterator over all values that are associated with some key in this map.

### Concrete Value Members

1. final def !=(arg0: Any)

Test two objects for inequality.

Test two objects for inequality.

returns

`true` if !(this == that), false otherwise.

Definition Classes
AnyRef → Any
2. final def ##(): Int

Equivalent to `x.hashCode` except for boxed numeric types and `null`.

Equivalent to `x.hashCode` except for boxed numeric types and `null`. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For `null` returns a hashcode where `null.hashCode` throws a `NullPointerException`.

returns

a hash value consistent with ==

Definition Classes
AnyRef → Any
3. abstract def ++[B](that: GenTraversableOnce[B]): GenMap[B]

[use case] Returns a new general map containing the elements from the left hand operand followed by the elements from the right hand operand.

[use case]

Returns a new general map containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the general map is the most specific superclass encompassing the element types of the two operands.

Example:

```scala> val a = List(1)
a: List[Int] = List(1)

scala> val b = List(2)
b: List[Int] = List(2)

scala> val c = a ++ b
c: List[Int] = List(1, 2)

scala> val d = List('a')
d: List[Char] = List(a)

scala> val e = c ++ d
e: List[AnyVal] = List(1, 2, a)```
B

the element type of the returned collection.

that

the traversable to append.

returns

a new general map which contains all elements of this general map followed by all elements of `that`.

Definition Classes
GenTraversableLike
Full Signature

#### abstract def ++[B >: (K, V), That](that: GenTraversableOnce[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

4. def ->[B](y: B): (GenMapLike[K, V, Repr], B)
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to ArrowAssoc[GenMapLike[K, V, Repr]] performed by method ArrowAssoc in scala.Predef.
Definition Classes
ArrowAssoc
Annotations
()
5. final def ==(arg0: Any)

The expression `x == that` is equivalent to `if (x eq null) that eq null else x.equals(that)`.

The expression `x == that` is equivalent to `if (x eq null) that eq null else x.equals(that)`.

returns

`true` if the receiver object is equivalent to the argument; `false` otherwise.

Definition Classes
AnyRef → Any
6. final def asInstanceOf[T0]: T0

Cast the receiver object to be of type `T0`.

Cast the receiver object to be of type `T0`.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression `1.asInstanceOf[String]` will throw a `ClassCastException` at runtime, while the expression `List(1).asInstanceOf[List[String]]` will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

returns

Definition Classes
Any
Exceptions thrown

`ClassCastException` if the receiver object is not an instance of the erasure of type `T0`.

7. def clone()

Create a copy of the receiver object.

Create a copy of the receiver object.

The default implementation of the `clone` method is platform dependent.

returns

a copy of the receiver object.

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
( ... )
Note

not specified by SLS as a member of AnyRef

8. abstract def collect[B](pf: PartialFunction[(K, V), B]): GenMap[B]

[use case] Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.

[use case]

Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.

B

the element type of the returned collection.

pf

the partial function which filters and maps the general map.

returns

a new general map resulting from applying the given partial function `pf` to each element on which it is defined and collecting the results. The order of the elements is preserved.

Definition Classes
GenTraversableLike
Full Signature

#### abstract def collect[B, That](pf: PartialFunction[(K, V), B])(implicit bf: CanBuildFrom[Repr, B, That]): That

9. abstract def copyToArray(xs: Array[(K, V)], start: Int, len: Int): Unit

[use case] Copies the elements of this general map to an array.

[use case]

Copies the elements of this general map to an array. Fills the given array `xs` with at most `len` elements of this general map, starting at position `start`. Copying will stop once either the end of the current general map is reached, or the end of the target array is reached, or `len` elements have been copied.

Note: will not terminate for infinite-sized collections.

xs

the array to fill.

start

the starting index.

len

the maximal number of elements to copy.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def copyToArray[B >: (K, V)](xs: Array[B], start: Int, len: Int): Unit

10. abstract def copyToArray(xs: Array[(K, V)], start: Int): Unit

[use case] Copies the elements of this general map to an array.

[use case]

Copies the elements of this general map to an array. Fills the given array `xs` with values of this general map, beginning at index `start`. Copying will stop once either the end of the current general map is reached, or the end of the target array is reached.

Note: will not terminate for infinite-sized collections.

xs

the array to fill.

start

the starting index.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def copyToArray[B >: (K, V)](xs: Array[B], start: Int): Unit

11. abstract def copyToArray(xs: Array[(K, V)]): Unit

[use case] Copies the elements of this general map to an array.

[use case]

Copies the elements of this general map to an array. Fills the given array `xs` with values of this general map. Copying will stop once either the end of the current general map is reached, or the end of the target array is reached.

Note: will not terminate for infinite-sized collections.

xs

the array to fill.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def copyToArray[B >: (K, V)](xs: Array[B]): Unit

12. def ensuring(cond: (GenMapLike[K, V, Repr]) ⇒ Boolean, msg: ⇒ Any): GenMapLike[K, V, Repr]
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to Ensuring[GenMapLike[K, V, Repr]] performed by method Ensuring in scala.Predef.
Definition Classes
Ensuring
13. def ensuring(cond: (GenMapLike[K, V, Repr]) ⇒ Boolean): GenMapLike[K, V, Repr]
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to Ensuring[GenMapLike[K, V, Repr]] performed by method Ensuring in scala.Predef.
Definition Classes
Ensuring
14. def ensuring(cond: Boolean, msg: ⇒ Any): GenMapLike[K, V, Repr]
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to Ensuring[GenMapLike[K, V, Repr]] performed by method Ensuring in scala.Predef.
Definition Classes
Ensuring
15. def ensuring(cond: Boolean): GenMapLike[K, V, Repr]
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to Ensuring[GenMapLike[K, V, Repr]] performed by method Ensuring in scala.Predef.
Definition Classes
Ensuring
16. final def eq(arg0: AnyRef)

Tests whether the argument (`that`) is a reference to the receiver object (`this`).

Tests whether the argument (`that`) is a reference to the receiver object (`this`).

The `eq` method implements an equivalence relation on non-null instances of `AnyRef`, and has three additional properties:

• It is consistent: for any non-null instances `x` and `y` of type `AnyRef`, multiple invocations of `x.eq(y)` consistently returns `true` or consistently returns `false`.
• For any non-null instance `x` of type `AnyRef`, `x.eq(null)` and `null.eq(x)` returns `false`.
• `null.eq(null)` returns `true`.

When overriding the `equals` or `hashCode` methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (`o1 eq o2`), they should be equal to each other (`o1 == o2`) and they should hash to the same value (`o1.hashCode == o2.hashCode`).

returns

`true` if the argument is a reference to the receiver object; `false` otherwise.

Definition Classes
AnyRef
17. def equals(that: Any)

Compares two maps structurally; i.e., checks if all mappings contained in this map are also contained in the other map, and vice versa.

Compares two maps structurally; i.e., checks if all mappings contained in this map are also contained in the other map, and vice versa.

that

the other map

returns

`true` if both maps contain exactly the same mappings, `false` otherwise.

Definition Classes
GenMapLikeEquals → AnyRef → Any
18. def finalize(): Unit

Called by the garbage collector on the receiver object when there are no more references to the object.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the `finalize` method is invoked, as well as the interaction between `finalize` and non-local returns and exceptions, are all platform dependent.

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
( classOf[java.lang.Throwable] )
Note

not specified by SLS as a member of AnyRef

19. abstract def flatMap[B](f: ((K, V)) ⇒ GenTraversableOnce[B]): GenMap[B]

[use case] Builds a new collection by applying a function to all elements of this general map and using the elements of the resulting collections.

[use case]

Builds a new collection by applying a function to all elements of this general map and using the elements of the resulting collections.

For example:

`def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")`

The type of the resulting collection is guided by the static type of general map. This might cause unexpected results sometimes. For example:

```// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)```
B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new general map resulting from applying the given collection-valued function `f` to each element of this general map and concatenating the results.

Definition Classes
GenTraversableLike
Full Signature

#### abstract def flatMap[B, That](f: ((K, V)) ⇒ GenTraversableOnce[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

20. abstract def foreach(f: (A) ⇒ Unit): Unit

[use case] Applies a function `f` to all elements of this general map.

[use case]

Applies a function `f` to all elements of this general map.

Note: this method underlies the implementation of most other bulk operations. It's important to implement this method in an efficient way.

f

the function that is applied for its side-effect to every element. The result of function `f` is discarded.

Definition Classes
GenTraversableLikeGenTraversableOnce
Full Signature

#### abstract def foreach[U](f: ((K, V)) ⇒ U): Unit

21. def formatted(fmtstr: String)

Returns string formatted according to given `format` string.

Returns string formatted according to given `format` string. Format strings are as for `String.format` (@see java.lang.String.format).

Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to StringFormat[GenMapLike[K, V, Repr]] performed by method StringFormat in scala.Predef.
Definition Classes
StringFormat
Annotations
()
22. final def getClass(): Class[_]

Returns the runtime class representation of the object.

Returns the runtime class representation of the object.

returns

a class object corresponding to the runtime type of the receiver.

Definition Classes
AnyRef → Any
23. abstract def getOrElse(key: K, default: ⇒ V): V

[use case] Returns the value associated with a key, or a default value if the key is not contained in the map.

[use case]

Returns the value associated with a key, or a default value if the key is not contained in the map.

key

the key.

default

a computation that yields a default value in case no binding for `key` is found in the map.

returns

the value associated with `key` if it exists, otherwise the result of the `default` computation.

Full Signature

#### abstract def getOrElse[V1 >: V](key: K, default: ⇒ V1): V1

24. def hashCode(): Int

The hashCode method for reference types.

The hashCode method for reference types. See hashCode in scala.Any.

returns

the hash code value for this object.

Definition Classes
GenMapLike → AnyRef → Any
25. final def isInstanceOf[T0]

Test whether the dynamic type of the receiver object is `T0`.

Test whether the dynamic type of the receiver object is `T0`.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression `1.isInstanceOf[String]` will return `false`, while the expression `List(1).isInstanceOf[List[String]]` will return `true`. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

returns

`true` if the receiver object is an instance of erasure of type `T0`; `false` otherwise.

Definition Classes
Any
26. abstract def map[B](f: ((K, V)) ⇒ B): GenMap[B]

[use case] Builds a new collection by applying a function to all elements of this general map.

[use case]

Builds a new collection by applying a function to all elements of this general map.

B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new general map resulting from applying the given function `f` to each element of this general map and collecting the results.

Definition Classes
GenTraversableLike
Full Signature

#### abstract def map[B, That](f: ((K, V)) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

27. abstract def max: (K, V)

[use case] Finds the largest element.

[use case]

Finds the largest element.

returns

the largest element of this general map.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def max[A1 >: (K, V)](implicit ord: Ordering[A1]): (K, V)

28. abstract def maxBy[B](f: ((K, V)) ⇒ B): (K, V)

[use case] Finds the first element which yields the largest value measured by function f.

[use case]

Finds the first element which yields the largest value measured by function f.

B

The result type of the function f.

f

The measuring function.

returns

the first element of this general map with the largest value measured by function f.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def maxBy[B](f: ((K, V)) ⇒ B)(implicit cmp: Ordering[B]): (K, V)

29. abstract def min: (K, V)

[use case] Finds the smallest element.

[use case]

Finds the smallest element.

returns

the smallest element of this general map

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def min[A1 >: (K, V)](implicit ord: Ordering[A1]): (K, V)

30. abstract def minBy[B](f: ((K, V)) ⇒ B): (K, V)

[use case] Finds the first element which yields the smallest value measured by function f.

[use case]

Finds the first element which yields the smallest value measured by function f.

B

The result type of the function f.

f

The measuring function.

returns

the first element of this general map with the smallest value measured by function f.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def minBy[B](f: ((K, V)) ⇒ B)(implicit cmp: Ordering[B]): (K, V)

31. final def ne(arg0: AnyRef)

Equivalent to `!(this eq that)`.

Equivalent to `!(this eq that)`.

returns

`true` if the argument is not a reference to the receiver object; `false` otherwise.

Definition Classes
AnyRef
32. final def notify(): Unit

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up a single thread that is waiting on the receiver object's monitor.

Definition Classes
AnyRef
Note

not specified by SLS as a member of AnyRef

33. final def notifyAll(): Unit

Wakes up all threads that are waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

Definition Classes
AnyRef
Note

not specified by SLS as a member of AnyRef

34. def par: ParMap[K, V]

Returns a parallel implementation of this collection.

Returns a parallel implementation of this collection.

For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, `par` takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.

Specific collections (e.g. `ParArray` or `mutable.ParHashMap`) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, `par` takes constant or sublinear time.

All parallel collections return a reference to themselves.

returns

a parallel implementation of this collection

Definition Classes
Parallelizable
35. abstract def product: (K, V)

[use case] Multiplies up the elements of this collection.

[use case]

Multiplies up the elements of this collection.

returns

the product of all elements in this general map of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the general map and as result type of `product`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def product[A1 >: (K, V)](implicit num: Numeric[A1]): A1

36. abstract def sameElements(that: GenIterable[(K, V)])

[use case] Checks if the other iterable collection contains the same elements in the same order as this general map.

[use case]

Checks if the other iterable collection contains the same elements in the same order as this general map.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Note: will not terminate for infinite-sized collections.

that

the collection to compare with.

returns

`true`, if both collections contain the same elements in the same order, `false` otherwise.

Definition Classes
GenIterableLike
Full Signature

#### abstract def sameElements[A1 >: (K, V)](that: GenIterable[A1]): Boolean

37. def sizeHintIfCheap: Int

The size of this collection or iterator if it is can be cheaply computed

The size of this collection or iterator if it is can be cheaply computed

returns

the number of elements in this collection or iterator, or -1 if the size cannot be determined cheaply

Attributes
protected[scala.collection]
Definition Classes
GenTraversableOnce
38. abstract def sum: (K, V)

[use case] Sums up the elements of this collection.

[use case]

Sums up the elements of this collection.

returns

the sum of all elements in this general map of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the general map and as result type of `sum`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def sum[A1 >: (K, V)](implicit num: Numeric[A1]): A1

39. final def synchronized[T0](arg0: ⇒ T0): T0
Definition Classes
AnyRef
40. abstract def to[Col[_]]: Col[(K, V)]

[use case] Converts this general map into another by copying all elements.

[use case]

Converts this general map into another by copying all elements.

Note: will not terminate for infinite-sized collections.

Col

The collection type to build.

returns

a new collection containing all elements of this general map.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def to[Col[_]](implicit cbf: CanBuildFrom[Nothing, (K, V), Col[(K, V)]]): Col[(K, V)]

41. abstract def toArray: Array[(K, V)]

[use case] Converts this general map to an array.

[use case]

Converts this general map to an array.

Note: will not terminate for infinite-sized collections.

returns

an array containing all elements of this general map. An `ClassTag` must be available for the element type of this general map.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def toArray[A1 >: (K, V)](implicit arg0: ClassTag[A1]): Array[A1]

42. abstract def toMap[T, U]: Map[T, U]

[use case] Converts this general map to a map.

[use case]

Converts this general map to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

Note: will not terminate for infinite-sized collections.

returns

a map of type `immutable.Map[T, U]` containing all key/value pairs of type `(T, U)` of this general map.

Definition Classes
GenTraversableOnce
Full Signature

#### abstract def toMap[K, V](implicit ev: <:<[(K, V), (K, V)]): GenMap[K, V]

43. def toParArray: ParArray[T]
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to CollectionsHaveToParArray[GenMapLike[K, V, Repr], T] performed by method CollectionsHaveToParArray in scala.collection.parallel. This conversion will take place only if an implicit value of type (GenMapLike[K, V, Repr]) ⇒ GenTraversableOnce[T] is in scope.
Definition Classes
CollectionsHaveToParArray
44. def toString(): String

Creates a String representation of this object.

Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.

returns

a String representation of the object.

Definition Classes
AnyRef → Any
45. final def wait(): Unit
Definition Classes
AnyRef
Annotations
( ... )
46. final def wait(arg0: Long, arg1: Int): Unit
Definition Classes
AnyRef
Annotations
( ... )
47. final def wait(arg0: Long): Unit
Definition Classes
AnyRef
Annotations
( ... )
48. abstract def zip[B](that: GenIterable[B]): GenMap[((K, V), B)]

[use case] Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

returns

a new general map containing pairs consisting of corresponding elements of this general map and `that`. The length of the returned collection is the minimum of the lengths of this general map and `that`.

Definition Classes
GenIterableLike
Full Signature

#### abstract def zip[A1 >: (K, V), B, That](that: GenIterable[B])(implicit bf: CanBuildFrom[Repr, (A1, B), That]): That

49. abstract def zipAll[B](that: Iterable[B], thisElem: (K, V), thatElem: B): GenMap[((K, V), B)]

[use case] Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Note: might return different results for different runs, unless the underlying collection type is ordered.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

thisElem

the element to be used to fill up the result if this general map is shorter than `that`.

thatElem

the element to be used to fill up the result if `that` is shorter than this general map.

returns

a new general map containing pairs consisting of corresponding elements of this general map and `that`. The length of the returned collection is the maximum of the lengths of this general map and `that`. If this general map is shorter than `that`, `thisElem` values are used to pad the result. If `that` is shorter than this general map, `thatElem` values are used to pad the result.

Definition Classes
GenIterableLike
Full Signature

#### abstract def zipAll[B, A1 >: (K, V), That](that: GenIterable[B], thisElem: A1, thatElem: B)(implicit bf: CanBuildFrom[Repr, (A1, B), That]): That

50. abstract def zipWithIndex: GenMap[((K, V), Int)]

[use case] Zips this general map with its indices.

[use case]

Zips this general map with its indices.

Note: might return different results for different runs, unless the underlying collection type is ordered.

returns

A new general map containing pairs consisting of all elements of this general map paired with their index. Indices start at `0`.

Definition Classes
GenIterableLike
Full Signature

#### abstract def zipWithIndex[A1 >: (K, V), That](implicit bf: CanBuildFrom[Repr, (A1, Int), That]): That

Example:
1. `List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))`

51. def [B](y: B): (GenMapLike[K, V, Repr], B)
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to ArrowAssoc[GenMapLike[K, V, Repr]] performed by method ArrowAssoc in scala.Predef.
Definition Classes
ArrowAssoc

1. def +(other: String)
Implicit
This member is added by an implicit conversion from GenMapLike[K, V, Repr] to any2stringadd[GenMapLike[K, V, Repr]] performed by method any2stringadd in scala.Predef.
This implicitly inherited member is shadowed by one or more members in this class.
To access this member you can use a type ascription:
`(genMapLike: any2stringadd[GenMapLike[K, V, Repr]]).+(other)`
Definition Classes